SH-MAG2 Magnetic Contact

Home SH-MAG2 Magnetic Contact Shepherd Ultimate E2E line Shepherd Ultimate E2E line SH-MAG2 Magnetic Contact

SH-MAG2 Magnetic Contact

Two Way Wireless Door/Window Magnetic Contact

The magnetic contact is an advanced magnetic contact sensor with integrated RF transceiver designed to be a fully supervised low-current device. A built-in reed switch and/or an external wired input may be applied in this device. To maximize security, an 8.2K end-of-line resistor is monitored on the external wired input. The Magnetic contact uses smart message control, which verifies that all messages are successfully transmitted, so that no intrusion event will be uninformed to the system. Each magnetic contact has a unique factory set ID code (24bit) which by registration is set into memory of the paired SHEPHERD™ Transceiver, enabling more secured communication and devices to be remotely controlled from a specific transceiver.

Detection Method	Internal reed switch or External magnet device
Data Protocol	Freewave2™ Two Way Protocol
Modulation Type	GFSK
Frequency Band	868-869MHz / 916-917MHz
Identification	Unique ID serial number – 24 bit
Event Transmission	Alarm, Tamper, Supervision, Low Battery
External Input	Up to 15m with 8.2Kohm EOL resistor
LED Indications	Green/Red during pairing, Red for each transmission
Range in open space	500 m
Tamper Switch	Front cover removal & Back tamper
Supervision	7 min by default (programmable between 1 to 30 min)
Current Consumption	Standby: ~3µA, Receive: ~29mA, Transmit: ~38mA
Transmit power	~10dBm
Power Supply	Lithium 3V battery type CR123 / Size 2/3AA
Battery Life	Up to 5 years
Operating temperature	-10°C to +55°C
Dimensions	97 mm x 22 mm x 21 mm
Weight (inc. battery)	40 gr

SH-MAG2

Door/Window Magnetic Contact

Installation Instructions

1.37 MB

Download

SH-MAG2

Door/Window Magnetic Contact

Declaration of Conformity

258.98 KB

Download