SH-I/O 2×2
SH-I/O 2×2
The SH-I/O 2x2 is an external 2-way wireless device featuring 2 Inputs and 2 Output Relays for SHEPHERD™ control panels.
2 Inputs and each one can be configured in EOL/GPIO working mode.
GPIO mode- each input can be configured to NO or NC.
EOL mode-each input can monitor up to 3 resistors values, 2.2KΩ, 4.7KΩ, and 8.2KΩ.
2 Outputs Relays control. Wire terminals for easy installation.
Bi-Color LED indication.
Sending Alert/Restore events.
Sending Open/Close Tamper events.
Monitoring battery level with Low and cutoff battery indication.
AC fail indication if module is not connected to an external power supply unit.
Data Protocol | FW2 Protocol Modulation Type GFSK (2 frequencies) |
Frequency band | 8F – 868.35MHz, 9F – 916.5MHz |
Identification | Unique ID serial number – 24 bit |
Event Transmission | Output State, Tamper, Supervision, Low battery, Keep alive |
Supervision Time | 1 min. (by default) |
Operation | 2 X CR 123A Lithium batteries 3V Battery life up to 5 years Optional External P.S 5V to 12VDC 0.5A |
Current Consumption | Average <70 µA Transmission ~60 mA Transmit Power <14dBm |
Operating temperature | -10ºC to +55ºC |
Average current | GPIO mode ~70uA EOL mode ~130uA |
Relay MAX. Current capacity | 24V/1A |
VOUT: feed from Vin through resettable fuse 100mA | |
Dimensions | 128mm x 70mm x27mm |
Weight (incl. battery) | 148 gr |