SH-I/O 2x2 > Crow

Home SH-I/O 2×2 SH-I/O 2×2

SH-I/O 2×2

The SH-I/O 2x2 is an external 2-way wireless device featuring 2 Inputs and 2 Output Relays for SHEPHERD™ control panels. 2 Inputs and each one can be configured in EOL/GPIO working mode. GPIO mode- each input can be configured to NO or NC. EOL mode-each input can monitor up to 3 resistors values, 2.2KΩ, 4.7KΩ, and 8.2KΩ. 2 Outputs Relays control. Wire terminals for easy installation. Bi-Color LED indication. Sending Alert/Restore events. Sending Open/Close Tamper events. Monitoring battery level with Low and cutoff battery indication. AC fail indication if module is not connected to an external power supply unit.

Data Protocol	FW2 Protocol Modulation Type GFSK (2 frequencies)
Frequency band	8F – 868.35MHz, 9F – 916.5MHz
Identification	Unique ID serial number – 24 bit
Event Transmission	Output State, Tamper, Supervision, Low battery, Keep alive
Supervision Time	1 min. (by default)
Operation	2 X CR 123A Lithium batteries 3V Battery life up to 5 years Optional External P.S 5V to 12VDC 0.5A
Current Consumption	Average <70 µA Transmission ~60 mA Transmit Power <14dBm
Operating temperature	-10ºC to +55ºC
Average current	GPIO mode ~70uA EOL mode ~130uA
Relay MAX. Current capacity	24V/1A
VOUT: feed from Vin through resettable fuse 100mA
Dimensions	128mm x 70mm x27mm
Weight (incl. battery)	148 gr

SH-I/O 2x2

External two-way wireless device

Installation Instructions

328.61 KB

Download

SH-I/O 2x2

External two-way wireless device

Declaration of Conformity

336.70 KB

Download