Home
GBD-PLUS Shock & Glass Break
Products
GBD-PLUS Shock & Glass Break
GBD-PLUS Shock & Glass Break
GBD-PLUS Shock & Glass Break


GBD-PLUS Shock & Glass Break
Shock and/or breakage selectable.
Analyzes two frequencies.
Unique signal analysis ignores environmental disturbances.
Memory LED.
ASIC based electronics.
Sensitivity adjustment.
Ceiling or wall mount.
Detection method | Electro condenser microphone | |
Detection range | 10m, Adjustable | |
Alarm period | 2 sec (± 0.5sec) | |
Led indicators | Green LED for Shock Yellow LED for Glass Red LED during Alarm |
|
Warm up period | 60 sec (± 5sec) | |
Alarm output | N.C 50mA/24Vdc with 10 Ohm in line resistor | |
Tamper Switch | N.C 50mA 24Vdc with 10 Ohm in line resistor | |
Operating voltage | 9 to 16 VDC | |
Current draw | Active: 25 mA (± 5%), Standby: 22 mA (± 5%) | |
RFI protection | 30V/m 10 – 1000MHz | |
EMI protection | 50,000V of electrical interference from lightning or power through | |
Temperature compensation | Yes | |
Operating temperature | -20°C to +50°C | |
Dimensions | GBD PLUS : 78 mm x 51 mm x 21 mm | |
Weight | 40 gr |
Related Products

LCD Keypads

LED Icon Keypads

FW2-Tx/Rx Transceiver/Receiver for Runner™

Voice Board

Speech Programmer

Output Relay Board Expander

D-LINK USB/RS232

RUNNER LINK™ TCP/IP GATEWAY

R4816-4G IP Module

R864M-1 RUNNER™ 8/64 Control Panel

R864EX-Z8 8/16 Input Zone Expander

R864EX-O4 Four Output Expander

R864-KP1 Small LCD Keypads

KP-Touch Screen Keypads

R864-W-IF2 Access Control Module

R864 - PSU2 Power Supply Module

Reader/Keypad Access Control Readers

SWAN QUAD Digital PIR

SWAN 1000 PIR & Microwave

SWAN PGB - PIR, Shock & Glass Break

TLC-360° PIR Detector
